Jump to content

GWR 4073 Class 5051 Earl Bathurst

From Wikipedia, the free encyclopedia

GWR 5051 Drysllwyn Castle
5051 Drysllwyn Castle & 7029 Clun Castle at Plymouth in 1985 while working "The Great Western Limited" railtour.
Type and origin
Power typeSteam
DesignerCharles Collett
BuilderGWR Swindon Works
Build dateMay 1936
Specifications
Configuration:
 • Whyte4-6-0
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.3 ft 2 in (0.965 m)
Driver dia.6 ft 8+12 in (2.045 m)
Length65 ft 2 in (19.86 m) over buffers
Width8 ft 11 in (2.718 m)
Height13 ft 1 in (3.988 m) (Cut back from 13 ft 4+12 in (4.077 m))
Loco weight79 long tons 17 cwt (178,900 lb or 81.1 t)
89.4 short tons full
Tender weight47 long tons 6 cwt (106,000 lb or 48.1 t)
53.0 short tons full
Fuel typeCoal
Fuel capacity6 long tons 0 cwt (13,400 lb or 6.1 t)
6 long tons 0 hundredweight (6.10 t; 6.72 short tons)
Water cap.4,000 imp gal (18,000 L; 4,800 US gal)
Firebox:
 • Grate area29.36 sq ft (2.728 m2)
BoilerGWR Standard Number 8
Boiler pressure225 lbf/in2 (1.55 MPa)
Heating surface:
 • Firebox162.7 sq ft (15.12 m2) (Collett)
163.5 sq ft (15.19 m2) (Hawksworth)
 • Tubes1,857.7 sq ft (172.59 m2) (Collett)
1,799.5 sq ft (167.18 m2) (Hawksworth)
CylindersFour (two inside, two outside)
Cylinder size16 in × 26 in (406 mm × 660 mm)
Valve gearInside cylinders: Walschaerts
Outside cylinders: derived from inside cylinders via rocking bars.
Valve typePiston valves
Loco brakeVacuum
Performance figures
Tractive effort31,625 lbf (140.68 kN)
Career
OperatorsGreat Western Railway
British Railways
Power classGWR: D
BR: 7P
Axle load classGWR: Red
WithdrawnMay 1963
Current ownerDidcot Railway Centre
DispositionStatic Display

5051 Drysllwyn Castle is a Great Western Railway (GWR) Castle Class locomotive built at Swindon Works in May 1936 and named after Dryslwyn Castle. It is owned by the Didcot Railway Centre.

Service life

[edit]

5051 was built at Swindon Works in May 1936 and was named after Drysllwyn Castle, carrying this name for the first 18 months of its working life before being renamed to Earl Bathurst in August 1937 (the name coming from a de-named Dukedog Class No. 3208/9008).[citation needed] It would carry this name for the rest of its Great Western and British Railways working career. Its original name would later be applied to classmate No. 7018.

It was first allocated to Landore depot in Swansea and remained there until June of 1961, when it was transferred to Neath (shed code 87A). It was transferred to Llanelly (87F) in February 1963 and remained there until withdrawal in May that same year, having run 1,300,000 miles. It was later sold to Woodham Brothers in Oct of the same year.[1]

Preservation

[edit]

5051 remained in the scrapyard until March 1969, when it was purchased by John Mynors and sold to the Great Western Society at Didcot Railway Centre for restoration. It was restored to steam in 1979 and was reunited with its original Drysllwyn Castle nameplates. It was regularly steamed during the 150th anniversary celebrations of the Great Western Railway in 1985.

It returned to steam in 1998 following an overhaul at Didcot and it was later returned to mainline service. On one occasion in the summer of 2003, it stood in for No. 7802 Bradley Manor working the Torbay Express, promoted by Past-Time Rail (7802 was booked to work the trains from Bristol Temple Meads to Kingswear and return, but on the first train of the season Bradley Manor developed a hot axle box and was unable to haul the next two outings, which saw 5051 take the Manor's place). Being faster than 7802 (which could only run at 60 mph, compared to 75 mph for 5051), it managed to keep to the timetable without any issues. 7802 later returned for the 31 August and 7 September trips.[2]

It ran for most of its preserved life in lined GWR green with the letters GW on its tender. Prior to withdrawal, it was painted in BR lined green with the early emblem on its tender. Its boiler ticket later expired in 2008. At present, 5051 remains a static display. [3]

In preservation, it has run with both Collett and Hawksworth tenders; it was initially paired with a Collett tender following its restoration from scrapyard condition in the 1970s, and briefly used a Churchward tender following its overhaul in 1998. It was later paired with a Hawksworth tender, which it used for its previous boiler ticket. It has now once again been paired with a Collett tender while on display in the Great Western Society's engine shed at Didcot.

References

[edit]
  1. ^ Daniel, John (16 April 2013). "The Barry Scrapyard story, part 1". The Great Western Archive.
  2. ^ Wilcock, David (2003). "Down Main". Steam Railway. Vol. 288. p. 70.
  3. ^ "5051 Drysllwyn Castle, GWS Didcot website".
[edit]